If you have plenty of patches, flags etc but not enough velcro loop are to put them here is you answer: MOLLE compatible plates for your patches. Lite model for stitching a piece of velcro loop to and then attach the whole thing to your gear or a little heavier one if you want to use some adhesive for attachment.

This saves the trouble of sowing something directly to your gear and allows to change patches quickly if necessary.

For stitching I found it easier to attach the velcro loop part with a couple of drops of CA glue first. I used a 5/10 needle and made two rounds with a thread through the holes. It might be a little tricky first to find the hole coming from the loop side but at least I found them pretty quickly after the couple of first ones.

Please note the little grooves on one side, they are meant for the thread to be a little hidden, so put the velcro loop on the other side of the item.

Obviously not meant for actual combat environments.

This model for a 77*47mm flag and 50mm velcro loop.

Now also a stealth model with the hooks behind the velcro. This will require a bit more work, cutting up the velcro etc but might look nicer and will take less space.