Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
I 3D desingned this model to be print with commun paramethers, it doesnt require horizontal expansion.
It just need supports in certain parts.
The mechanism require 4 bearings of 32mm (there are 3D bearings models that you can print, so you can avoid buying them)
Finally all the pices have holes in order to be easy to assembly them, some of them need glue.
1,850
Curtidas
3,504
Downloads
11
Impressões
Categoria
Engineering
Tags
engine
airplane
turbofan
cfm
Licença
Creative Commons — Attribution
Arquivos (36)
TopOfMainFan.stl
3.7 MB
Base2.stl
1.6 MB
Small1BigCover3.stl
6.8 MB
Small2BigCover2.stl
12.1 MB
Small2BigCover3.stl
6.8 MB
BackCover.stl
6.1 MB
Small1BigCover2.stl
12.1 MB
Base1.stl
1.6 MB
SlitsOfInteriorOfCover1.stl
27.4 MB
SlitsOfCover3.stl
27.5 MB
ConnectorOfMechanism.stl
8.5 KB
Cover2.stl
10.8 MB
Body2.stl
3.2 MB
Back.stl
26.6 MB
BigCover2.stl
24.1 MB
BigSlits.stl
20.7 MB
Body1.stl
8 MB
CoverOfMainFanMechanism.stl
8.3 MB
Body3.stl
5.3 MB
BigCover1.stl
13 MB
ConnectorMechanism3ToBack.stl
10 MB
BigCover3.stl
13.5 MB
Cover3.stl
18.4 MB
Cover1.stl
14.2 MB
Mechanism2.stl
20.8 MB
Mechanism1.stl
8.2 MB
MainFan.stl
34.7 MB
InteriorOfCover1.stl
18.5 MB
FanConnectorToMechanismOfCover1.stl
36.4 MB
MechanismOfCover1.stl
52.8 MB
Mechanism3.stl
20.7 MB
FansOfCover3Part2.stl
93.8 MB
FansOfCover1.stl
111.3 MB
MechanismOfCover3.stl
46.9 MB
SlitsOfCover1.stl
109.8 MB
FansOfCover3Part1.stl
93.8 MB