Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
I wanted to mount my Raspberry Pi Camera close to the bed but not on the gantry beam in the rear.
The Camera just fits in this position without being hit by the toolhead (tested with Stealthburner) and without interfering with the front idler.
When mounting the holder slowly move the toolhead to x=max, y=min and z=0 to find the perfect location.
The holder is mounted with a M3x8 and a hammerhead nut.
I made one holder tilted back by 10 degrees and one tilted back by 15 degrees.
104
Curtidas
972
Downloads
11
Impressões
Categoria
Accessories
Tags
cameramount
webcam
raspberrypi
webcammount
raspberrypicamera
picam
picamera
raspicam
octopicamera
voron
webcamholder
rpicamera
raspberrypicam
rpirpicam
voron2
vorondesign
voron24
voronmod
voronstealthburner
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (4)
Voron PiCam Holder 15deg.stl
39.2 KB
Voron PiCam Holder 10deg.stl
39.4 KB
Voron PiCam Halterung 10grad.step
44.3 KB
Voron PiCam Halterung 15grad.step
51 KB