Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Corona multitool with holster por JoonaK no Printables

Descrição

A multitool to operate doors, locks, buttons, shopping carts etc. Inlcudes also pliers for grabbing and/or picking stuff.

I think every "hygienic" tool needs a holster because otherwise you just put the germs from the tool into your pockets and from there to your hands and in worst case without realizing you put the germs all the way into your face or food.

This multitool with its' holster can be worn on any garment and even put into a pocket or a bag wihtout the risk of contaminating the insides. You can wash the tool and the holster with your hands and even spray disinfectant inside the holster if you want to be extra careful.

Introduction video of the functionality:

Print instructions

I have tested ONLY Prusament PETG.

Use 100% infill for the holster.

Multitool can lift (at least) 8 kg with 15 % infill but broke when operating a full shopping cart. 50 % infill made it intact.

Both g-codes have 100% for the holster and 50% for the multitool.

Printables

Corona multitool with holster

Publicado em 5 de abr de 2020

11
Curtidas
144
Downloads
Categoria Other Gadgets
Tags
multitool corona
Licença Creative Commons — Public Domain
Arquivos (6)
corona_multitool-e_holster-e.3mf 2.4 MB
corona_multitool-e_holster-e.stl 9.3 MB
corona_multitool-e.stl 4.1 MB
corona_multitool-e_holster-e_cover-body.stl 1.1 MB
corona_multitool-e_holster-e_clip-body.stl 675.9 KB
corona_multitool-e_holster-e_main-body.stl 3.4 MB
Ver no Printables (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta