Hour, minute and second hand for a standard press-on clock movement.

Print Settings

Printer:

Artillery Sidewinder X1

Rafts:

Supports:

No

Infill:

Notes:

The hour and minute hand should press onto the clock movement snugly but not too tight. If you find the holes are too small to fit on, calibrate your esteps and flow if you haven't already, and/or play around with the "Hole horizontal expansion" setting in Cura 4.6, incrementing by 0.1mm or 0.05mm to get the right fit. Normal horizontal expansion will do the same thing to the hole but also to the rest of the hand which shouldn't be a big deal.

The second hand might be a little tricky to slice right to get it to fit onto the movement. The walls of its mounting peg are 0.4mm thick, so you may want to adjust your line width accordingly.

Category: Household