This Emergency Stop Button Module allows you to use a standard power inlet and a standard outlet with a emergency stop button in the middle. This works great for 3D Printers, Lasers or any number of power tools. You can use this for just about anything electrical being mindful not to exceed the 10a rating of devices plugged into it.

Assembly Video: [https://youtu.be/U8_z71O2Cwc](https://youtu.be/U8_z71O2Cwc)

Novelty use this for anything electrical!

Emergency Stop Button: [https://www.amazon.com/gp/product/B07R8PTTDX?ie=UTF8&th=1&linkCode=sl1&tag=rwmech-20&linkId=3ea6a1296a95472e935fbc1415aa81a2&language=en_US&ref_=as_li_ss_tl](https://www.amazon.com/gp/product/B07R8PTTDX?ie=UTF8&th=1&linkCode=sl1&tag=rwmech-20&linkId=3ea6a1296a95472e935fbc1415aa81a2&language=en_US&ref_=as_li_ss_tl)

Power Outlet (US) : [https://www.amazon.com/gp/product/B07R8PTTDX?ie=UTF8&th=1&linkCode=sl1&tag=rwmech-20&linkId=3ea6a1296a95472e935fbc1415aa81a2&language=en_US&ref_=as_li_ss_tl](https://www.amazon.com/gp/product/B07R8PTTDX?ie=UTF8&th=1&linkCode=sl1&tag=rwmech-20&linkId=3ea6a1296a95472e935fbc1415aa81a2&language=en_US&ref_=as_li_ss_tl)

Power Inlet : [https://www.amazon.com/gp/product/B07R8PTTDX?ie=UTF8&th=1&linkCode=sl1&tag=rwmech-20&linkId=3ea6a1296a95472e935fbc1415aa81a2&language=en_US&ref_=as_li_ss_tl](https://www.amazon.com/gp/product/B07R8PTTDX?ie=UTF8&th=1&linkCode=sl1&tag=rwmech-20&linkId=3ea6a1296a95472e935fbc1415aa81a2&language=en_US&ref_=as_li_ss_tl)

You'll also need around 4 M3 8mm screws and some wire with fork connectors.

Print Settings

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: PolyMaker PLA

Category: DIY