A group of modular tool racks, designed for a particle pegboard with holes, 1 inch center-to-center. Each model shares the same size footprint, and is specially designed for, but not limited to, the following tools: Pliers, Screwdrivers, Files/Cables, Blades.

Due to the thin particle board, zip ties were the chosen method of attachment. Two zip ties hold each tool rack to the pegboard. As each workshop is individual, I have uploaded the surface models (STP file format), so you can customize the holes for your own hardware setup as needed, or print as-is. 

I have also designed/printed/installed a version of these on a European metal pegboard in my workshop as well (metal pegboard 6 mm holes, 15 mm center-to-center). The design uses M6 metric bolts to screw into the surface, if you are interested please see the designs here: www.printables.com/model/281039

Files and Hardware:

All files are surface models (STEP), as you will likely want to customer the hole size for your individual pegboard. I designed this with my Prusa MK3+ in mind, but this should be easy to print on any FDM printer with standard settings. All parts are optimally sized to fit on the MK3+ build plate.

Printing:

All parts print great with the standard Prusa Slicer “0.20 mm QUALITY” profile settings and no supports!

Nozzle: 0.4 mm

Layer Height: 0.2 mm

Supports: None

Perimeters: 3

Infill: 20%