Credits
This is a remake of faisca2000's Secret Box over at thingiverse: Secret Box. 

The Remake
I wasn't able to print the drawer of faisca2000's design (closure of the drawer). Therefore I drew the closure of the drawer as a seperate click-in seperator. Doing so I also added room for two magnets (10mm diameter, 2mm height) which hold the drawer in the body.

Printing
For the photo shooting I printed a box in blue (my camera does not like black stuff). But I strongly recommend to print the box with a glossy black filament. 
In order to insert the magnet in the body, the printer must be paused. I suggest to place this pause at 13mm as the first scantling starts here and a disturbance at this point is OK.

Assembly
You need two magnets (10mm diameter, 2mm height) and some glue. In my experience it is easier to glue plastic to plastic, therefore the magnet-covers which hold the magnets in place. You may want to glue the wall onto the drawer as well but I do not. 

I hope you have fun with this Remake.