A PSU-mount for the Atomstack A5 Pro laser engraver. I assume it also fits on the non pro.

Makes it a little easier to put it aside.

PSU-dimensions are ca. 113x50x33.

Mount it with some short M4-bolts and T-nuts. Check if it fits before mounting. You have to bent it open to place the psu inside the mount. Print it as it is placed in the stl.

Happy lasering :)

Print Settings

Rafts:

No

Supports:

Notes:

1.2 mm walls will work, 15% infill. PLA worked fine for me.

Category: Hobby