This is a remix of the german "Wordclock Wortuhr" case comprising the following changes:

• I added a printed diffusor layer finishing the front cover.
• I removed the hanger assembly on the back and the cable inlet on the side as I prefer to use the clock with a stand.
• I removed the DIP mount from the interior part as I connected the USB cable to the ESP directly.
• I added a cable inlet and cord grip on the back accordingly.
• I designed a new “invisible” stand. 

Thanks to N1cls and AWSW for this great project and their support building the word clock!

Hints

• When printing the multi-colored front cover make sure the first two layers for the diffusor are printed in a light or translucent color. The following layers should be printed with dark filament.
• The stand has an inclination of 5% - I suggest to glue it to the back of the clock for more stability (the lower screw will be still accessible.
• These models are just a modified case - for full instructions and appropriate software see “Wordclock Wortuhr”.