Wilko Wilkinson plug-in plugin timer replacement peg segment

Replacement peg for the cheap Wilkinson's branded plug-in timers. I think it's a generic product re-branded.

Link to the timer (for reference purposes, I do not endorse)... [http://www.wilko.com/extension-leads/wilko-mechanical-segment-timer/invt/0343076](http://www.wilko.com/extension-leads/wilko-mechanical-segment-timer/invt/0343076)

The one I printed has been tested and works well.

I deeply suggest that you use the suggested print settings.

Apologies for the state of the SCAD file, I may update it at some point to look a little less of a disaster!

Print Settings

Printer:

Alunar M505 (Anet A8), heavily modified.

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.1mm

Infill:

100%

Notes:

I suggest you print 0.1mm layer height, 100% infill (in case it needs them), and slowly (I printer 10mm/s).

Post-Printing =============

Remove Supports.

You will need to carefully remove the supports from the part, this may involve using cutters and a file to get the file as accurate as possible to the dimensions in the SCAD file (see attached).

Category: Replacement Parts

Descrição

Print Settings