This one is for a 0.8mm Blade (Slot is 1.2 wide)

Need a different Angle? Just print and drop Insert in.
PM if you need other Angles or width for the Blade.

Number on the ladeXX.stl is for the expected Angle. 

Depending on how you you put your workpiece in and what slot you use you end up with the “opposite angle". Meaning if you use the 92° insert you might end up with 88°. So please make a test cut first. I usually use some styrofoam first.

Always check angle on something you can spare before you cut your good stuff.

Nozzle: 0.4 to 0.6

Walls: ~1.5 mm (4Walls for 0.4 Nozzle)

Infill: 40%