A filament spool holder designed to allow the spool to rotate while placed on a flat surface. The stand is universal and can be used with the Prusament filament spools.

Take a look at our website for more designs and custom 3D prints: [https://halcondesigns.co.uk](https://halcondesigns.co.uk)

Print instructions

Recommended Hardware:

• 4 x Standard 608 Bearings (required)
• 4 x M3 x 12mm Socket Button Screws (required)
• 4 x M3 Hexagon Nuts (not required, but preferred)

Links to Hardware:

Standard 608 Bearings: [https://www.amazon.co.uk/gp/product/B00WXDAUQG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1](https://www.amazon.co.uk/gp/product/B00WXDAUQG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1)

M3 x 12mm Socket Button Screws: [https://www.accu.co.uk/en/socket-button-screws/8104-SSB-M3-12-A2](https://www.accu.co.uk/en/socket-button-screws/8104-SSB-M3-12-A2)

M3 Hexagon Nuts: [https://www.accu.co.uk/en/hexagon-nuts/7888-HPN-M3-A2](https://www.accu.co.uk/en/hexagon-nuts/7888-HPN-M3-A2)

Stand will be compatible with most spools, but will not be compatible with spools with an outer diameter of 162mm or less