Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Please also note my new solution: [https://www.printables.com/de/model/353611-openscad-clamp-esp32cam-to-anycubic-vyper](https://www.printables.com/de/model/353611-openscad-clamp-esp32cam-to-anycubic-vyper)
----------------------------------------------------------------------------------------------------
Changes:
- move the connector to bottom side to mount it upright on [https://www.thingiverse.com/thing:5322479](https://www.thingiverse.com/thing:5322479)
- add slot for antenna wire
- remove slot for micro usb port
- enlarge case and backsied to 102% (fits better in my oppion)
- change hole on backsode to present 5V and GRD Pin
The ring is the same as in @Electroniclibre design
Category: 3D Printer Parts
Printables
ESP32cam Upright camera mount
Publicado em 18 de set de 2023
6
Curtidas
34
Downloads
1
Impressões
Categoria
Other Printer Parts & Upgrades
Tags
esp32
esp32cam
thingiverse
Licença
Creative Commons — Attribution
Arquivos (9)
ESP32cam_back_scale_102.stl
644.9 KB
ESP32cam_ring_original.skp
273.5 KB
ESP32cam_back_scale_102.skp
158.1 KB
ESP32cam_upright_case_scale_102.skp
2.9 MB
ESP32cam_ring_original.stl
777.5 KB
ESP32cam_upright_case_scale_102.stl
7 MB
mountsphere_3mm.stl
54.2 KB
mountsphere_5mm.stl
50.8 KB
mountsphere_4mm.stl
54 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta