Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is a 24mm arcade button housing, nut, and cap using a cherry MX Switch.
The tolerances are a bit tight on the threads, 0.1mm layer height is a requirement, and the STL was mostly adjusted for my own 3D printer. You may have to play with your printer settings to get it to thread properly.
Wires will need to be soldered onto the Cherry MX switch itself.
89
Curtidas
681
Downloads
1
Impressões
Categoria
Video Games
Tags
arcadejoystick
arcade
arcadebutton
fightstick
hitbox
Licença
Creative Commons — Attribution
Arquivos (3)
24mm_Button_Cap.stl
353 KB
24mm_Button_Nut.stl
572.4 KB
24mm_Button_Body.stl
1.2 MB