I decided build a print server for my old printers. I wanted to make a case that was mountable, but also support the Waveshare Ethernet/USB HUB as I needed more than 1 USB port for my set up. There were a few cases out there, but nothing that fully filled the role I needed. So, I blended 4 different designs into this one. This case is mountable with the top being secured on by m3 nuts instead of snapping on. Depending on your printer and how dialed in it is, they will either drop in, or if like me, I pressed them in. 

Installation of all the boards is pretty straight forward:

1. Pi Zero on the bottom
2. Insert screws from the bottom and then place spacers in
3. Insert Waveshare Ethernet/USB HUB
4. Put top on, screw closed
5. Enjoy!

Link to Waveshare Ethernet/USB HUB: [https://www.amazon.com/gp/product/B07T35X4P4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1](https://www.amazon.com/gp/product/B07T35X4P4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)