This is a rather nice looking (and feeling) keychain, I modeled it after the Volvo v70 and created it to be dual color.

What will you need to print this?

- 2 colors of filament of choice (obviously it's also possible to print this in one color), you need to change the filament at the layer where only the body is being printed (at height 3.6mm or 3.7mm but I would recommend checking that first in your preview)

-A black sharpie (the tires will come out like you top color so you need to fill them in)

-In case you want it to be a keychain a "splitring" (whatever you want to use should be fine, just make sure it can go trough the wheels)

ATTENTION: In stock size this print will only be possible with a layer width of 0.4 or smaller. There are areas that are about 0.5 mm wide, meaning that with a larger nozzle with you'll need to scale it up to print those parts and if you want to scale it down you need to have a very small layer width.