This is a simple hand drill that is inspired by keyglitch's K-Drill which in turn is inspired by Prusa's P-Dill.

This one is made to hold a 4 mm drill bit with two M3 nuts and two M3x10 mm skrews. This allows you to get sufficient torque to drill out holes in your 3D printed parts.

The Design is quite simple and you can simply modify it to suit your needs.

Recomended print settings:

Infill: 25% Gyroid 

Layer Hight: 0,15 mm

Perimiters: 3 (0,4mm Nozel)