Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Multi-Use Case with Inserts por JamesThePrinter no Printables

Descrição

A small, strong case with a collection of optional inserts for different uses.

 

Case

Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.

This can be a standalone case or you can add inserts for more functionality. As requested, I have included the following lids with text to label the contents of your case:

  • Blank Lid (default and easiest to print)
  • AA Lid
  • AAA Lid
  • 9V Lid
  • Digital Media Lid
  • Nozzle Lid
Print Settings

Base and Lid can be printed with 3 perimeters and 0% infill. Using these settings, most walls will be solid.  The combined print time was just over 3 hours for me.

Optional Inserts

  • Battery Holders 
    • AA Holder - fits up to 6 AA batteries
    • AAA Holder - Version 1 fits up to 6 AAA batteries, Version 2 (currently untested) holds up to 8 batteries
    • 9V Holder - fits up to 2 9V batteries
  • Digital Storage Holders - Can be used together or separately
    • MicroSD Card Holder - fits up to 12 MicroSD cards in the lower section
    • SD Card Holder - fits up to 6 SD cards in the upper section
  • Dividers
    • Full Divider - Splits the entire case into 2 compartments
    • Upper Divider - adds 2 compartments on top - Can be used with the Lower Divider
    • Lower Divider - adds 2 compartments on bottom - Can be used with the Upper Divider
  • Nozzle Holders - Can be used together or separately 
    • Upper Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
    • Lower Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
Print Settings

No special print settings are needed for any of the inserts. I used 2 perimeters and 10% infill. Print times range from 35 minutes to 2 hours, depending on which insert(s) you choose to use.

 

More inserts from other users can be found here.

 

Buy Me A Coffee

 

The following filaments were used in the pictures above:

Black Case

  • polymaker PolyTerra Charcoal PLA
  • Hatchbox Sparkle Gray PLA

Red Case

  • polymaker PolyTerra Army Red PLA
  • polymaker PolyTerra Lava Red PLA

Yellow Case

  • PrintBed Yellow PLA
  • polymaker PolyTerra Banana PLA

Teal Case

  • polymaker PolyTerra Arctic Teal PLA
  • PrintBed Baja Blue PLA

Purple Case

  • Prusament Galaxy Purple PLA
  • Fillamentum Lilac PLA

Orange Case

  • CC3D Flame Orange PLA+
  • Inland Orange PLA

Green Case

  • PrintBed Green PLA
  • polymaker PolyTerra Forest Green PLA

Blue Case

  • GIANTARM Matte Navy Blue PLA
  • polymaker PolyTerra Sapphire Blue PLA
Printables

Multi-Use Case with Inserts

JamesThePrinter JamesThePrinter (abre em nova aba)

Publicado em 31 de out de 2024

6,591
Curtidas
15,956
Downloads
387
Impressões
Categoria Organizers
Tags
box organizer functional aa sd case container nozzle aaa sdcard microsd sdcardholder practicalprint practical divider nozzles nozzleholder e3dv6 useful rigid batteryholder dividers practicalprinting aabattery aabatteryholder 9volt 9vbatterycase 9vholder functionalprint microsdcardholder heavyduty batterycase strong aaabattery aaabatteryholder microsdholder multifunction ruggedcase rugged aaabatterystorage 9vbattery sdcardcase aaabatterycase multifunctional microsdcardcase practicalprints practicaldesign aaabatterybox aaabatteries nozzlebox microsdcard 9v 9vbatterystorage 9vbatteryholder sdcardorganizer multiuse convert microsdcase mk8nozzle aaabox aabox strongbox microsdorganizer ruggedbox heavydutybox strongcase heavydutycontainer heavydutycase rigidbox aacase aaacase e3dv6nozzle
Licença Creative Commons — Public Domain
Arquivos (19)
Base.stl 1.2 MB
Lid.stl 1.1 MB
AA Insert.stl 899.5 KB
AAA 6 Battery Insert.stl 766.7 KB
AAA 8 Battery Insert.stl 987.4 KB
9V Insert Insert.stl 305.7 KB
Upper SD Card Insert.stl 1.1 MB
Lower MicroSD Insert.stl 1.3 MB
Upper Nozzle Insert.stl 1.6 MB
Lower Nozzle Insert.stl 1.7 MB
FullDivider.stl 815.6 KB
Upper Divider Insert.stl 485.3 KB
Lower Divider Insert.stl 152.5 KB
Labeled Lid - AA.stl 1.1 MB
Labeled Lid - AAA.stl 1.1 MB
Labeled Lid - 9V.stl 1.1 MB
Labeled Lid - Digital Media.stl 1.3 MB
Labeled Lid - Nozzle.stl 1.2 MB
Multi Use Case.f3d 3.4 MB
Ver no Printables (abre em nova aba)
Comparar agora