Ir para conteúdo
3DFinder
Iniciar sesión

Estás en 3DFinder

Buscamos en Thingiverse, MakerWorld y Printables al mismo tiempo para darte lo mejor de cada una.

Buscar más como este
Modelo 3D Flight Simulator Course Deviation Indicator por CaptainBobSim en Printables

Descripción

Here are the VORs/CDIs for a flight simulator. They will be configured with MobiFlight.

View the build video here: [https://youtu.be/Jq4_RMyj-hM](https://youtu.be/Jq4_RMyj-hM)

The configuration video has not been published as of writing this.

(I really just need to get off my bum and film it. Right?)

The decals are in this folder for higher resolution: [https://drive.google.com/drive/folders/1r1SBga4WL2TXje20luGypGTj4T9WZyP7?usp=sharing](https://drive.google.com/drive/folders/1r1SBga4WL2TXje20luGypGTj4T9WZyP7?usp=sharing) as well as the GIMP file.

If you would like to purchase the printed parts, and/or a kit with the hardware, email me at CaptainBobSim@gmail.com.

Feel free to leave any comments, and ask any questions!

If you'd like to support projects like this in the future, feel free to leave a tip.

Release 1.0: Files Released

Release 1.1: FreeCAD prototype files and STLs attached 7.9.2021

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Infill:

20

Filament:

N/A PLA

Black


Notes:

Print the needles with raft and supports
Printed front face-plate with supports touching base-plates

Print gears with the gears facing up

Category: Vehicles

Printables

Flight Simulator Course Deviation Indicator

CaptainBobSim CaptainBobSim (abre en nueva pestaña)

Publicado el 9 de jul. de 2022

36
Me gusta
146
Descargas
Categoría Vehicles
Etiquetas
indicator thingiverse navigation simulation cessna 172 cdi instruments c172 vor
Licencia Creative Commons — Attribution — Noncommercial — Share Alike
Archivos (24)
CDI_1_Needle_Horizontal.stl 6.8 KB
CDI_12_Hardware_Mount.stl 176.2 KB
CDI_12_Servo_Shell.stl 14.7 KB
CDI_12_Stepper_Gear.stl 54 KB
Bezel_with_Knob_and_block_supports.stl 70.5 KB
CDI_12_Gear_Ring_Numbers.stl 168.1 KB
CDI_12_Vertical_Needle.stl 6.8 KB
VOR_Faceplate_for_2_Needles.stl 69.2 KB
CDI_2_Faceplate_1_Needle.stl 69 KB
Bezel_with_Knob_and_block_supports.amf 16.2 KB
CDI_12_To-From_Indicator_Prototype.stl 17.5 KB
CAD_VOR_Bearing_and_Servo_Holder_9.30.19_17.29.FCStd 7.6 KB
Bearing_Holder_with_Guides.FCStd 25.8 KB
VOR_Bearing_Cover_2.FCStd 10 KB
Complete_Bearing_Holder.FCStd 29 KB
VOR_Faceplate_for_2_Needles.amf 15.7 KB
CDI_12_Hardware_Mount.amf 40 KB
CDI_1_Needle_Horizontal.amf 2 KB
CDI_12_Stepper_Gear.amf 12.4 KB
CDI_12_Servo_Shell.amf 3.4 KB
CDI_2_Faceplate_1_Needle.amf 15.6 KB
CDI_12_Vertical_Needle.amf 2 KB
CDI_12_Gear_Ring_Numbers.amf 37.9 KB
CDI_12_To-From_Indicator_Prototype.amf 4.1 KB
Ver en Printables (abre en nueva pestaña)

¿Te gusta este modelo? Crea una cuenta gratis para guardar tus favoritos y volver a ellos más tarde.

Crear cuenta
Comparar ahora