A very basic deck box for storing your Magic the Gathering Commander decks. It holds 100 cards double sleeved in Dragon Shield inner and outer sleeves with a little room to spare for tokens. When printed with 15% infill, it takes about 110g of filament to print, and is strong enough that I was able to stand on it without damaging the box. The top uses very little filament, so you can label your decks and just replace it if you decide to change the deck that is in the box without too much waste. The top is also a pretty tight fit by design, so you may need to adjust your XY Size Compensation if your tolerances aren't great.