Wood Thread Cutting Jig

This is a jig to help cut wood threads in dowels. The initial version cuts threads in 1 1/4" dowels with 6 TPI.

It locks into the opening of a router table. You then insert a 60 degree v-bit in the router and raise it enough so that the tip matches the depth of the thread in the jig. You may have to adjust the height of the router bit. To cut the threads, you turn on the router and then feed the dowel into the guide end (the end without threads) while turning the dowel. It should catch after a few turns and the threads of the jig will continue to pull the dowel through at the correct rate.

[https://a360.co/3umnKDV](https://a360.co/3umnKDV)

I found the the YouTube channel “The Swedish Maker” used this design and made a variant of it.

Print Settings

Printer:

Railcore II 300ZL

Rafts:

Supports:

Yes

Resolution:

Filament: matterhackers PETG blue

Category: Machine Tools

Descrição

Print Settings