This is a case for the commonly available high voltage generator “Toy”. I created this the first time I dropped the board and the coil broke away from the board. I figured it needed something to protect the coil while still making the top available.

Printed in PLA @0.2mm layer. There are two versions of the Lid, one made for M3 inserts (4mm holes) and one for M3 bolts to “Self Tap” into. The coil “Pipe” needs to be glued in to the lid from the inside, This could also be glued to the outside if the coil is not lined up exactly the same as mine.

(Just realised I hadn't added vents for the heatsinks so I have updated the stl's)