Racing micro drone gate

Here’s a fully printable drone racing gate that Is the perfect size for setting up an indoor track.

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

Supports:

Resolution:

.2mm

Infill:

20%

Filament: Whatever material you prefer PLA Whatever color you prefer

Notes:

Print 4 of the quarter gates to make a complete circle. After printing all the parts press the 4 quarter gates together. They fit tight together but will fit with a good bit of pressure. To secure the gate to the base use a nylon zip tie or super glue.

Print the base laying flat. I’m not sure why the file saved on its side

Category: Toys & Games

Descrição

Print Settings