Hi, this is my remix of Sunflower Clock from Romano Ruggeri ( [https://www.printables.com/model/68389-sunflower-clock](https://www.printables.com/model/68389-sunflower-clock) ).

My design is just 40cm in diameter (see last picture) and it is a bit easier to assemble. It's designed for 55mm x 56mm clock mechanics. If it includes the sheet metal hangig eye, just cut it off:

Assembly:

1. print all parts (see Printing section bellow !!!)
2. insert clock mechanics into the body
3. slide all petals (leafs) into the slots around the body (NO GLUE)
4. add the dots (NO GLUE)
5. insert hands (as for the second hand I used just the pin, grinded it flat and glued the printed second hand on) 
6. hang it on a screw using the jagged ramp integrated in body

Printing:

Print the petals (leafs) with 1 perimeter, 0 bottom and 0 top layers and 0,6mm extrusion width !!!.

Other parts do not require any special settings. (see 3mf files for PrusaSlicer)

Also check out:

[https://www.youtube.com/channel/UChKp-968z1i5PN29gbR7YfA](https://www.youtube.com/channel/UChKp-968z1i5PN29gbR7YfA)

[https://www.cgtrader.com/rorys3d](https://www.cgtrader.com/rorys3d)