🇲🇽 ¡VIVA MÉXICO! 🇲🇽
 

If you are Mexican, a vexillologist (look it up!), or simply don't know what to do with your color filaments, this Flag Coaster collection is for you!

Check out my other flag models available!

You can sell these but please give credit, review & post photos of your prints back here!

-----3D PRINTING SETTINGS-----

90 mm diameter

3 mm height

With regular setups, all parts are printed separately, one by one. You can print all parts flipped 180 degrees on your slicer to get the texture from a textured bed. Each part is named according to the color to use, so you won't get confused with the sizes.

This model is particular because the National Emblem is very intricate and difficult to print at this size, so an option for inserting a MXN $10 pesos coin is included (worth about 50 USD or EUR cents). If you don't have access to this coin, you can print the version with the emblem in it, and even start with brown or gold, then pause and change to finish in white. Use slow speeds like 15mm/s for it, and watch out for stringing.  

With MMU, you can print all at once.

You can also get creative outcomes by printing with interesting infills and no top layers, for example!

Parts already include enough tolerance to allow an easy assemble. Very minor cleaning might be necessary for a good fit, especially if your printer produces blobs, zits or elephant foot.

I set mine on a cork circle with self-adhesive. You can glue to normal cork, felt, wood, or whatever you like, as well as scaling to whatever size you like.