Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Print model with PLA, PETG, ABS using 0.2 layer height, 15% infill.
I use 0.6mm nozzle but 0.4 will also work.
Prints without support.
You will need 2 small magnets per frame: 5 mm in diameter and 2 mm thickness.
You can get them cheap from Ali or your local store.
Use pliers to put the magnets into the frame.
67
Curtidas
270
Downloads
4
Impressões
Categoria
Photo & Video
Tags
frame
mini
photo
magnet
fridge
instax
Licença
Creative Commons — Attribution
Arquivos (2)
Instax Mini Frame.stl
109.7 KB
Instax Mini Frame.3mf
67.9 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta