Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This two piece print uses a screw to adjust height anywhere from a 90mm to 55mm gap between the GPU shroud and the case.
Update: A few printers have expressed that the threads are tight. Be aware, depending on your print settings, you may want to add an extra off set to either piece for a better fit.
98
Curtidas
1,487
Downloads
13
Impressões
Categoria
Electronics
Tags
support
bracket
gpu
sag
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (2)
Bottom.stl
5.4 MB
Top.stl
9 MB