Estás en 3DFinder
Buscamos en Thingiverse, MakerWorld y Printables al mismo tiempo para darte lo mejor de cada una.
Descripción
This is a simple and robust housing for a KFB 2.0 Controller.
It will coincidentally fit as a controller housing on a Renkforce RF500 (it was originally designed with this printer in mind).
Measurements:
- housing approx. 114x149x75mm (with mounted fan)
- 4 mounting holes provided (for 4-5mm screws): hole distance x=87mm and y=117mm
Please refer to the mockup for further information and assembly.
Additional parts needed:
- 80mm fan with 8 mounting screws
- 4 x 3x8mm screws to mount the KFB 2.0 board
- 4 x 3x8mm screws if you optionally want to fasten the cover (it is designed to be snap-on)
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Infill:
at least 25% for smooth surface
Category: 3D Printer Accessories
0
Me gusta
21
Descargas
Categoría
Accessories
Etiquetas
thingiverse
Licencia
Creative Commons — Attribution — Noncommercial
Archivos (6)
KFB_2.0_Housing_Bottom.stl
165.1 KB
KFB_2.0_Housing_Grille.stl
664.6 KB
KFB_2.0_Housing_Bottom_modified_for_RF500.stl
158.9 KB
KFB_20_Housing_Mockup_-_DO_NOT_PRINT.stl
1.3 MB
KFB_2.0_Housing_Middle.stl
120.5 KB
KFB_2.0_Housing_Top.stl
104 KB
¿Te gusta este modelo? Crea una cuenta gratis para guardar tus favoritos y volver a ellos más tarde.
Crear cuenta