Zombie Moon Clock

4 Color Glow in the Dark Wall Clock:

Just "in time" for Halloween.

Designed at 140mm square to fit my printer bed. The first layer is the square background.

On top of that I placed a 1mm thick circle for the full moon and another 1mm layer as the crescent and some craters as highlights. Also at that layer is the hour marks since I wanted them to be a glow in the dark layer as well.. The final layer is the Zombie hand mound and a boarder is applied around the square.

I set a 8mm hole punched in the center to accommodate the clock movement.

Clock kit:

I got a 3/4 inch shaft clock movement kit from hobby store for 7 bucks (with 20% coupon). Amazon has many similar for a few dollars more. Search "3/4 Clock Movement Repair Kit".

There's a large selection, some with many hands in the kit. Choose one with a description like "suitable for 4 - 8 mm (5/ 32 - 5/16 inch) thickness clock panel."

See below for list of print pause places I used.

Thanks for checking out my design.

Print Settings

Printer Brand:

FlashForge

Printer:

Rafts:

Yes

Supports:

Resolution:

PLA Standard

Infill:

Filament: Amolen, Flashforge PLA Multicolor - See notes below

Notes:

Category: Decor