It's my take on a cuboid stand for a globe, based on [https://www.thingiverse.com/thing:2818901](https://www.thingiverse.com/thing:2818901) but built from scratch.

I included two models of different sizes, both with a thickness of 15 mm and leg length of 60 or 70 mm respectively. A tad smaller than what you find at other sites.

Update: I added a third, 50mm and 12 thick.

I printed it with the hole pointing up and tree support so the pin comes out regular and the hole has no tiny errors. You'll need three of the pieces, may need some sanding and degrating. It is a tight fit but meant to be.