Ever wished you could pack your gridfinitised workshop for some on-the-go action? Well this is a solution. I wouldn't call it the solution; its grossly overcomplicated, requires post processing, and has not been field tested at all. If you can look past these shortcomings, then enjoy!

The default configuration is 3x5 slots, and you can try different dimensions yourself: [https://a360.co/3NkyOrE](https://a360.co/3NkyOrE). The number of parts however, remains the same per "layer" regardless of your chosen dimensions.

Per Layer:

• [1] PLATE
• [2] CLASP HOOK
• [4] CLASP ARM
• [6] Axle (3 mm S.Steel Rod) [70 mm length]

in addition to this.

Per Toolbox:

• [1] LID
• [1] HANDLE
• [2] Axle (3 mm S.Steel Rod) [50 mm length]
• [2] M4 Threaded Brass Insert
• [2] M4 Shoulder Bolt (10 mm Shoulder) (Alternatively a regular 15~20 mm Bolt if that's how you roll)

The files provided are for the default configurations 030504 and 030506

The naming convention is as follows:

• ## ## ## - ########
• ## → Width of toolbox [integers] [ 02 < n < 10 ]
•       ## → Length of toolbox [integers] [ 03 < n < 10 ]
•             ## → Thickness of toolbox layers [integers] [ 03 < n < 06 ]
•                     ######## → Part name
• Values left as ‘##’ signify that the part works for all variants of this dimension.