Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
parts:
- edge - 8x
- corner - 8x
- core1 - 2x
- core2 - 2x
- antipop - 2x
- top caps - 2x
- side caps - 2x
- front caps - 2x
- screw with diameter less than 3,4mm and lenght 35-40mm
- pen spring
assembly:
- Glue core1 and core2 together with superglue and try to get them perfectly alligned and do this to the other side.
- After the glue dries you can assemble the cube. There is hole for the antipop, so screw the cores with two antipops.
- Then just push the caps to the holes and it should work but I recommend sanding the pieces, co the cube work a bit smoothly and after that it has even some decent cornercutting.
I added stl´s for separate caps if you need to print them separately.
18
Curtidas
82
Downloads
2
Impressões
Categoria
Puzzles & Brain-teasers
Tags
cube
rubiks
square
rubix
square1
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (16)
CORNER CAP2.stl
198.1 KB
MID CAP2.stl
215.7 KB
CENTER CAP.stl
22 KB
EDGE.stl
487.4 KB
edge cap2.stl
105.4 KB
edge cap1.stl
237.4 KB
CORNER CAP1.stl
198.1 KB
core1.stl
487.9 KB
CORNER CAP2.stl
163.9 KB
MID CAP1.stl
206.5 KB
core2.stl
467.2 KB
corner.stl
654 KB
ANTIPOP.stl
257.5 KB
top caps.stl
1.1 MB
front caps.stl
1.6 MB
side caps.stl
1.3 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta