Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are using a 0.2 mm layer height in your slicer settings. Then inspect your print and tweak one setting at a time until you get a perfect first layer as that is the most important layer.
Once you get a good result with the simple shapes, try the extreme test. If you can get that to print without any gaps, then you have a perfect first layer.
Print Settings
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
None
How I Designed This
Fusion 360
Category: 3D Printing Tests
114
Curtidas
11,860
Downloads
13
Impressões
Categoria
Test Models
Tags
test
calibration
first
testprint
thingiverse
settings
layer
adhesion
firstlayertest
singlelayer
Licença
Creative Commons — Attribution
Arquivos (6)
First_Layer_Hex_0.2.stl
2.3 KB
First_Layer_Oval_0.2.stl
76.9 KB
First_Layer_Extreme_Test.stl
100.3 KB
First_Layer_Circle_0.2.stl
55.9 KB
First_Layer_Square_0.2.stl
1.1 KB
First_Layer_Octo_0.2.stl
3 KB