I liked the original design but I didn't need the large hole OR screw holes in the mounting plate, as I am mounting it with 3M Command adhesive strips.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.20mm

Infill:

Filament: Hatchbox PLA, 1.75mm White How I Designed This ===================

Imported the original designers .stl file into Fusion 360.rnConverted the model, Mesh to BREPrnI made a sketch on the bottom face of a circle SLIGHTLY larger than the original round basernI extruded the circle to the top of the round base.rnI cleaned things up just a bit, leaving the nice round base with the support legs still intact.rnI exported the model to .STLrnrnWhen I imported the .STL into Fusion 360, it imported it 10x too big (centimeters vs millimeters, I guess). I didn't notice this until I imported the model into PrusaSlicer. I've overwritten the .STL so it should work correctly for you.rnrnWarning: I've included the .STL and Fusion 360 export file. If you import my Fusion 360 model and re-create the .STL from Fusion 360, your model will be 10x too big (unless you scale the model in Fusion).

Category: Containers