Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
I recently created a Mac Keyboard riser with angle and decided I wanted a short version, too. Here I've remixed the original design so the rise is about 1.25" instead of about 3.25".
Print two "base.stl" and one of each of the others.
The orientation should be correct as distributed so you only need supports for "middle.stl".
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
35%
Filament: Hatchbox PLA, 1.75 White and Gold
Notes:
Print in provided orientation.
Supports are ONLY needed for "middle.stl".Post-Printing
Use CA / super glue to assemble the pieces.
Tolerances are tight. It assembles fine when printed from my Prusa i3 MK3. If too tonight to assemble the pieces, some sanding might help.
I used "Gear Gripz" (the adhesive black hex dots in the photos, purchased from Amazon) to on the bottom and on the angled part to help keep the stand and keyboard in place. This has proven effective for me.
How I Designed This
Designed with digital calipers and a bit of intuition in Fusion 360.
Category: Organization
Mac Keyboard (Lower) Riser Stand with Angle
Publicado em 9 de mai de 2022