RICBA Rooster Games Trophy

The Rhode Island Children's Book Award presents this trophy you can print right in your own library!

After a rousing round of Rooster Games, what better way to celebrate than with a nice custom trophy?

Here's a link for the Gold PLA used to create the model you see in the pictures: [https://www.amazon.com/gp/product/B06XRPYXP2/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1](https://www.amazon.com/gp/product/B06XRPYXP2/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1)

Print Settings

Printer:

Dremel Idea Builder

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2mm

Infill:

30%

Notes:

Feel free to use a raft if you have a tough time getting prints to stick to your build plate, but it has got a sturdy enough base layer where it should adhere just fine.

Supports shouldn't be necessary, but feel free to use them if you'd like.

I used 30% infill to be safe but you could probably get away with going all the way down to 15% to save time/material.

Category: Props

Descrição

Print Settings