Flat Side Style Crankbait

Inspired by: [https://www.thingiverse.com/thing:2463713](https://www.thingiverse.com/thing:2463713)

A more agressive Version of the Original

I re-designed the whole thing from scratch, so measurements will differ, i also taylored it to materials i use for the hook hangers ect.

Main changes are that the sides are now truly flat wich makes for minimal work in cleaning layerlines.

The belly takes 12 0.4gr lead BBs, treble hooks and split rings should be the same as in the original since size roughly matches.

I also added creases in the back in the hope to improve the action a bit.

Its a completely different model though, so i'm not yet sure until i finish the first of them.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Supports:

Resolution:

0.2

Infill:

20%

Filament: Goedis PLA Black Post-Printing =============

Step 1

Clean up the alignment holes with a knife, insert some bits of filament a little over a centimeter long is enough!

Step 2

Glue both halfs together, either with the hook hangers in place like the original, or like me, first glue it together and then glue in twisted wire as hook hangers, both approaches work well alltough the original can be superiour in taking forces when a fish bites. i never had a hook come lose tough, so my approach works too and its a bit easier to bulk produce.

Step 3

Prime, Sand, Paint it as you like

Step 4

GO FISHING!

Category: Sport & Outdoors

Descrição

A more agressive Version of the Original

Print Settings