Ir para conteúdo
3DFinder
Iniciar sesión

Estás en 3DFinder

Buscamos en Thingiverse, MakerWorld y Printables al mismo tiempo para darte lo mejor de cada una.

Buscar más como este
Modelo 3D Borderlands Outrunner/Runner por Andrew en Printables

Descripción

The Runner/Outrunner from Borderlands and Borderlands 2, modelled up in Fusion 360 using the games as a reference. The model is split into parts and optimised for 3D printing to help make things as simple as possible to print, whilst still maintaining a high level of detail.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

Yes

Resolution:

0.15

Filament:

Prusa PLA

N/A


Notes:

Splitting some of the parts in your slicer programme and then gluing them together after printing will make them easier to print with less supports and better quality.
The main chassis should be printed in two halves (split where the turret is).

Post-Printing

The model after priming

Post printing any parts that had been split for easier printing were glued together.
The parts were then sanded extensively to achieve a smooth finish before being sprayed with primer using an airbrush.

After this the parts were sprayed up in the two main colours (turquoise and silver), any remaining painting was then done by hand. When most of the painting was complete the model was assembled.

After assembly the fine details were painted and the model was weathered.

Category: Video Games

Printables

Borderlands Outrunner/Runner

Andrew Andrew (abre en nueva pestaña)

Publicado el 1 de may. de 2022

40
Me gusta
198
Descargas
Categoría Other Gadgets
Etiquetas
car borderlands thingiverse vehicle buggy runner outrunner
Licencia Creative Commons — Attribution — Noncommercial — Share Alike
Archivos (41)
large_display_Wheel-_Axle_187635.stl 459.5 KB
large_display_Rear_Bars-2_187635.stl 390.4 KB
large_display_Suspension_Hub-_Step_187635.stl 379.4 KB
large_display_Chassis-_Front_MG_187635.stl 505.3 KB
large_display_Suspension_Hub-_Upper_handle_187635.stl 251.4 KB
large_display_Steering_wheel_187635.stl 404.1 KB
large_display_Front_suspension-_Wheel_Mount_R_187635.stl 313.4 KB
large_display_Front_suspension-_Wheel_Mount_L_187635.stl 319.7 KB
large_display_Suspension_Hub-_Lower_handle_187635.stl 232.3 KB
large_display_Chassis-__Front_handle_187635.stl 573.1 KB
large_display_Wheel_187635.stl 512.9 KB
large_display_Front_suspension-_Mudguard_187635.stl 409.6 KB
large_display_Suspension_Hub_187635.stl 476.8 KB
Main_Chassis.stl 2.6 MB
Suspension_Hub-_Mount.stl 35.2 KB
Rear_Bars-1.stl 223 KB
Turret-_Headrest.stl 15.9 KB
Chassis-_Centre_console.stl 160.8 KB
Chassis-__Front_handle.stl 13.9 KB
Front_suspension-_Mudguard.stl 646.8 KB
Turret-_Main_Cannon.stl 201 KB
Front_suspension-_Wheel_Mount_R.stl 137.1 KB
Front_suspension.stl 345.8 KB
Turret.stl 388.5 KB
Chassis-_Front_MG.stl 179.2 KB
Suspension_Hub-_Step.stl 10.8 KB
Turret-_Pivot.stl 35.3 KB
Wheel-_Axle.stl 32.9 KB
Chassis-__Front_step.stl 10.8 KB
Wheel.stl 1.4 MB
Suspension_Hub-_Lower_handle.stl 12.8 KB
Suspension_Hub-_Upper_handle.stl 13.9 KB
Chassis-__Side_handle.stl 15.5 KB
Chassis-_Front_seat.stl 176.5 KB
Suspension_Hub.stl 194.6 KB
Chassis-_Front_roll_bar.stl 308.4 KB
Steering_wheel.stl 10 KB
Rear_Bars-2.stl 137.4 KB
Rear_Suspension.stl 780.8 KB
Engine.stl 1.1 MB
Front_suspension-_Wheel_Mount_L.stl 137.1 KB
Ver en Printables (abre en nueva pestaña)

¿Te gusta este modelo? Crea una cuenta gratis para guardar tus favoritos y volver a ellos más tarde.

Crear cuenta
Comparar ahora