Enclosure for the Raspberry Pi zero with HQ camera.

As I had issues getting the correct screws for the model by Lilifee, I remodeled the enclosure to fit M2.5 screws with either button or cylinder head.

To setup the camera you can follow the instructions of this github project.
[https://github.com/showmewebcam/showmewebcam](https://github.com/showmewebcam/showmewebcam)

Necessary parts:

• Raspberry Pi Zero (W) or Pi Zero 2
• Raspberry Pi HQ camera
• Raspberry Pi Zero camera flex cable
• SD card
• Screws (6x M2.5x6 and 4x M2.5x10 or M2.5x12)

If you intend to use the stand you additionally need the following parts: (I lost my 1/4"x20 threaded adapter)

• 2x threaded M3 insert
• 2x M3x6 
• 2x M2x6