Want to build an SE/30-based CatMac Mini, but also want the drive tray to clear the ROM SIMM? Have larger RAM SIMMs? These are the modified parts you'll need.

This follows the original build instructions, and uses the same hardware. You also still want the original parts for the drive tray, the BlueSCSI standoffs and reset/interrupt buttons from the original project.

Notes:

• Currently requires a larger format printer. Core One L, Voron 300 or larger. I haven't generated the split versions of the files for this.

• I have not tested with taller RAM SIMMs like OWC's 16MB SIMMs, or with an aftermarket ROM SIMM. So long as they aren't taller than the stock ROM SIMM, it will clear.

• Includes the FreeCAD files used to make the modifications. Do be aware these are not very well structured. They also don't export to 3MF all that well, I had to export to STEP to get good geometry.