Here's a pack of Opossums I've sculpted for Tabletop Miniature use, or whatever you feel like!

Contains:

-Opossum (Mouth Open)

-Opossum (Mouth Closed)

-Opossum wearing a pack (Mouth Open)

-Opossum wearing a pack (Mouth Closed)

-Opossum twisting and screaming

-Opossum twisting and screaming (with flag)

-Tiny little baby Opossum (really small, best printed in resin or with a 0.2mm nozzle. Glue them onto the bigger ones if you want!)

-NEW: A momma Opossum covered in 4 little Opossuminos

With the exception of the Little Opossum model, all of them are sized to fit on a 1 inch round (25.4mm) base.

If you liked this model and want to show your thanks, you can buy me a coffee!

Or, check out my paid model shop, which helps support me even more!

And follow me on Instagram!

Or follow me on BlueSky!

If printing at the given tabletop scale, I suggest using a 0.2mm nozzle and 0.08 layer heights if possible for the best detail fidelity. If you'd like to print larger for desk decor, 200% scale or larger is perfectly fine with a 0.4mm nozzle at 0.12 mm layer heights. As always with organic models, use Arachne instead of Classic.

I've had best luck with Tree Slim autosupports, and manually printing a large brim ear all around the tail (they have a habit of coming loose just as they join with the main model)