MakerDeck… Are you a maker? Enjoy watching makers make? MakerDeck is a group-driven channel that’s always streaming (24/7) - and you (!) can join us to share your own maker activity alongside others (together)! Guided by a team from around the world, we’re always here to chat & interact. Always making something new!  [https://www.twitch.tv/makerdeck](https://www.twitch.tv/makerdeck)

Get your Prusameters… Post your Makes!

If you like this project, please don't forget to  ❤ Like  and  ★ Rate! 

MakerDeck Logo:

• MakerDeck-Plate_v2 - This “plate” has alignment guides for your "color slices”.
• MakerDeck-Slice - Color Slices for your MakerDeck Plate.
• MakerDeck-Stand_v1 - Simple Stand

NOTES: Printed the “Plate” in two colors. Printed the “slices” as single prints, different colors and glued in place.  Print in any flavor or color, its your badge! 

HINT: All printers a different. Print a logo test slice. You can enlarge or reduce the scale of your slice in your slicer if required (99% is a big reduction in overall size).   QR-Code on coin… if you slow down your print speed you will get better results. I find, in your slicer, performing a color change the layer AFTER it starts to print the QR-Code yields the best results.

MakerDeck Coins:

• MakerDeck-Coin_Slivers_v2 - 50mm Coin Logo w/QR-Code.
• MakerDeck-Coin-Slim_v1 - SLIM (1.8mm in height) 50mm Coin Logo w/QR-Code.
• MakerDeck-Coin_Logo_Only - NO QR code on the back.
• MakerDeck-Coin_QR_Only - NO LOGO, QR code Only.
• MakerDeck-Coin-Holder_v1 - Hold all your 50mm maker coins, for some wiggle room, you may want to scale holder up to 101% - 103%.

MakerDeck Coaster:

• MakerDeck-Coaster_v1 - 100mm (4 inch) Drink Coaster. Sliced for two color changes as shown in photo of slicer.

MakerDeck Spinners: (NEW) 

• MakerDeck_Spinner_Plate_v1 - Similar to the original MakerDeck-Plate_v2, but this one spins.  Might be loose for some…. This is my first version and I designed it to be a loose spinner so even if your printer isn't highly calibrated, you should have a spinner that spins.  This “plate” has alignment guides for your "color slices”.  Please message me with your results!
• MakerDeck_Spinner_Coaster_v1 - 100mm (4 inch) Drink Coaster with a BONUS… IT SPINS. Sliced for two color changes as shown in photo. (ie. Black, White, Black)

Twitch Partner Badge:

• Twitch_Badge - Celebrate your Twitch Partner - color change or paint your checkmark.
• Twitch_MakerDeck_Badge -  Twitch Partner MakerDeck Badge/Cover for your printed logo found here: [https://www.printables.com/model/174959-makerdeck-logo](https://www.printables.com/model/174959-makerdeck-logo)
• Twitch_MakerDeck_Badge_Insert - Simple colored insert for your MakerDeck Badge.

My Print Settings:  

• 0.16mm or 0.20mm Layer height  
• 4 perimeters
• 10% infill or your own preference