A hueforge model of a Tribal Fenix

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 99.96x150mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 3.84mm and the Actual Thickness is 3.68mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 5
    #0056b8 PLA BambuLab Basic Cobalt Blue  Transmission Distance: 1.2
    #0078bf PLA BambuLab Matte Marine Blue  Transmission Distance: 0.5
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #8bd5ee PLA BambuLab Matte Ice Blue  Transmission Distance: 3.5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Dark Gray
    At layer #14 (1.2mm) swap to Cobalt Blue
    At layer #15 (1.28mm) swap to Marine Blue
    At layer #22 (1.84mm) swap to Turquoise
    At layer #35 (2.88mm) swap to Ice Blue
    At layer #40 (3.28mm) swap to Jade White for the rest.