Nozzles for the Hyper Tough mini handheld blower/duster. 

One nozzle is shorter, and has a nozzle diameter of .87" versus the stock nozzle diameter of .61". Overall height is 1.75"

2nd nozzle has same outlet diameter with a total length of 3.25"

3rd nozzle has .62" outlet diameter and overall length of roughly 3"

The "Ext blower nozzle V2" Has a slightly smaller outlet diameter of roughly .82" so the outer walls are a little thicker.

These were printed in PLA, ABS, PETG (Sunlu brand) and all fit tight like the stock nozzle. One was printed in Creality Hyper PETG-CF and with same fitment. 

2 walls, 15-20% infill should be plenty - just don't drop them when they are attached to the tool haha. 

Different brands may shrink different. If so, post what brand filament and type you used along with the measurements of the bottom that goes into the tool so I can adjust. Or I can provide the freecad file for you to adjust. 

If these work for you, please considering donating to my Paypal to help fund more projects/prints. I also have other detailing related parts on my profile and plan to add more. Thank you! 

Paypal:

getsomepaintball@gmail.com