The White I use was a strong one. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 157.77x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.2mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #f3d538 PLA Overture Highlight Yellow  Transmission Distance: 6
    #e6eaef PLA Prusament Pristine White  Transmission Distance: 5.1
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #4 (0.4mm) swap to Highlight Yellow
    At layer #13 (1.12mm) swap to Pristine White for the rest.

Setting

Layer height: 0.08

Initial Layer height: 0.16

Wall: 2

Sparse infill density: 100%

Sparse infill pattern: Rectilinear

Turn Off Prime Tower