🔹 Included versions

• (For MMU) = 3MF file for PrusaSlicer + MMU (automatic color changes) or multi-tool printers.
  You only need to load the MMU with the 3 filaments (Dark blue, White, Red).

• (NO MMU) = 3MF file for PrusaSlicer without MMU (manual color change pauses already set)
  - It starts with Dark blue
  - Layer 8 (0.84 mm) - White
  - Layer 16 (1.50 mm) - Red
  - Layer 20 (1.82 mm) - White

• (STL) = Universal STL compatible with other slicers and printers.

             You will need to use the following settings:
             - Layer height = 0.08mm
             - First layer height = 0.20mm
             - Infill = 100%

              In the slicer select the model, then right-click → Height Range Modifier to set:
             - 1.40 – 1.50 mm → Layer height 0.10 mm

               Add the Color changes or Pauses in the slicer preview:
             - It starts with Dark blue
             - Layer 8 (0.84 mm) - White
             - Layer 16 (1.50 mm) - Red
             - Layer 20 (1.82 mm) - White

🔹 Printing Notes

• Printability: the model can be easily printed on any 3D printer with a 0.4 mm nozzle, without supports and without special precautions.

• Do not simplify the model: reducing the level of detail may lead to unpredictable results.

• Slicer processing time: a few minutes, due to the high level of detail.

• The “floating regions” warning can be ignored.

• The model can be scaled in X and Y, but not in Z. It can also be split into multiple parts to create a bas-relief larger than the print bed.