Simple print-in-place phone/tablet stand with four versions:

• Tablet stand with a lip for tablets up to 11 mm thick

• Tablet stand for a kids case for cases up to 17 mm thick

• Tablet stand without a lip for any thickness tablets

• Tablet stand without a lip for kids cases of any thickness

All four models can be printed without supports, however, for best results I recommend using your slicer to paint a support under the lip for the two models with lips.

The settings I used are:

• PLA / PETG

• Layer height: 0.2

• First layer height: 0.2

• Infill: 15%

• Infill pattern: Gyroid

• Supports

  • No supports for models without a lip

  • Supports only under the lip for the models with a lip