A 1:4 scale model of the Apple Lisa (original/Lisa 1 and Lisa 2/Macintosh XL).

The case is built to be used with a Raspberry Pi model 2, and includes mounting points for the Pi and a 2.5'' LCD display, such as this one from Adafruit: [https://www.adafruit.com/products/2298](https://www.adafruit.com/products/2298). A GPIO cable is required to connect the Pi and display.

The bottom Twiggy drive in the Lisa 1, and the single floppy slot on the Lisa 2 also has a mounting point for an SD card reader, or extension cable such as this one:

[http://www.amazon.com/Manufacture-Sdhc-micro-Reader-Extension-Cable/dp/B0085GGO92](http://www.amazon.com/Manufacture-Sdhc-micro-Reader-Extension-Cable/dp/B0085GGO92)

The parts of the case are 6 separate pieces that should snap together, though a small amount of glue at the corners will ensure that the model holds together during handling.

Category: Computer