A paint-ready keycap model for Cherry MX switches. Styled as a jaw trap. Paint example as shown in the photo.

Features:

• Compatible with Cherry MX switches

• Symmetrical cross mount (allows the keycap to be rotated 90° during installation)

• Overall height — 13 mm

• Base diameter — 20 mm

❤ Like the model?

Download it for free — I share most of my work openly.

I would appreciate your support on Boosty: [https://boosty.to/st14/donate](https://boosty.to/st14/donate)

On Boosty, you can also sign up for the "Creators sets" subscription — with it, I share original FreeCAD files for free modification, answer questions, and share my experience.

3D Printing Settings

• It is recommended to use ABS-like resin or durable ABS plastic for printing.

• When printing with resin, use normal printing speed (layer thickness 0.050 mm, exposure time 2.8 s).

Painting

The example in the photo is painted with the following paints:

• Vallejo 70.950 (Black)

• Vallejo 72.053 (Chainmail metal)

• AK 11089 (Blood red)

• Vallejo black primer (77.660)

• Vallejo gloss varnish (26.517)

Do not force the keycap onto the switch if it does not fit easily — you may damage the switch. Check the printing accuracy and, if necessary, widen the cross opening with a fine needle file or tweezers.